Investigating the effective treatment of oilfield-produced water using various materials
DOI:
https://doi.org/10.5281/t583mn67الكلمات المفتاحية:
Produced water, Water treatment optimization, Adsorption process, Oil removal.الملخص
The high concentration of organic, inorganic, and hazardous substances in produced water from oil and gas operations is a significant environmental problem. Nowadays, the petroleum business relies heavily on its treatment. The physical treatment approach utilizing adsorption was the main focus of this investigation. Samples of produced water were gathered from oil fields. The tests were conducted at room temperature. Adsorption was successful in drastically lowering the oil concentration. The produced water from the AA field had to be treated as the first stage. Various sustainable and chemical materials were employed. Before and after filtering, the oil content was 306.3 mg/L and 30.7 mg/L, respectively (indicating that filtration alone removed ~90%). The oil removal efficiency of activated carbon at different concentrations (0.01, 0.02, 0.03, 0.05, and 0.1 grams) was evaluated relative to the post-filtration concentration as 51.8%, 79.4%, 94.7%, 100%, and 100%, respectively. 100% elimination efficiency was attained by combining 0.03 g of activated carbon with 0.005 g of the nanomaterial Fe3O4 (total mass 0.035 g). At a concentration of 0.2 grams, additional materials such as graphene, sawdust, banana peel powder, and orange peel powder were also utilized, all of which achieved 100% removal efficiency. The BB field was tested in the second step. The oil concentration was 25 mg/L before filtration, and it was reduced to 1.1 mg/L after filtration. Activated carbon (0.02g) and a mixture of activated carbon (0.02g) with the nanomaterial Fe3O4 (0.005 g) were used; the oil removal efficiency was 54.5% and 100%, respectively. Additionally, heavy metals, specifically iron, were measured using Atomic Absorption Spectroscopy (AAS); the initial concentration was 720 mg/L, which was reduced to < Detection Limit < 0.05 mg/L after treatment with 1 g of activated carbon at optimized pH and contact time. The trials' findings demonstrated that the combination of activated carbon and the nanomaterial Fe3O4 at a concentration of 0.005 g was the most effective material for removing oil from produced water, achieving the highest removal efficiency (100%) in both the AA and BB fields at the lowest total dosage
المراجع
التنزيلات
منشور
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2026 مجلة القلم المنير للعلوم الإنسانية والتطبيقية

هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial 4.0 International License.


